Calmag - CalFresh Domestic Water Filter Kit
A filter system that is designed to supply quality drinking water and comes with its own separate drinking water touch tap. Water from the mains supply is connected to the inlet port of the unit and directed down through the filter cartridge. This removes unwanted contaminants. Filtered water then flows up through the centre of the cartridge and through the outlet where it is delivered through the separate drinking water touch tap.
CalFresh comes with two choices of cartridge. The first is an activated carbon and resin filter, the Fresh CR. This will remove bad taste, chlorine, odour, organic materials, lime scale, scum and heavy metals. The Fresh CR is often recommended to protect kettles from hard lime scale build up. The second is an activated carbon block filter, the Fresh C.
This will remove the same contaminants as the Fresh CR and will also remove sediment, dirt, discolouration, bacteria and cysts. However it will not remove lime scale and scum.
This does not cover the filter cartridge, which needs to be replaced at least twice annually depending on your water quality.
The CalFresh kit contains all the necessary screws and fittings required for easy installation.
Housing height 300mm
Housing diameter 75mm
Tap height 200mm
Tap reach 75mm
Inlet and outlet ¾” BSP female thread
Maximum working pressure 8 Bar
Minimum working pressure 1 Bar