Calmag - CalSoft Electrical Water Softener
This model is an electrical ion exchange water softner, where it will eliminate limescale problems in hard water areas. Ion exchange is a simple process whereby calcium (limescale) is replaced by sodium (salt) in your water this creates soft water.
Calsoft electrical water softener is as easy to install as a washing machine and comes with no flashing lights, digits or confusing programmes.
Water travels through the inlet to the bottom of the resin tank. It is then forced through the resin bed where calcium (limescale) particles are exchanged with sodium (salt) particles that are held on the resin beads. The softened water then passes through the outlet and supplies your home with limescale free, softened water.
After a period of time the resin vessel will become exhausted and needs to run through a regeneration or cleansing period. CalSoft runs on a timer system, which controls the regeneration process. Once the timer reaches the preset time, normally during hours when demand for water is at a minimum, it opens a solenoid that diverts water down the drain line. The unit then draws in a brine solution from the tank and forces it up through the resin bed, exchanging the calcium particles for sodium particles. This water, along with the calcium particles, is sent to drain. After the preset regeneration period passes the timer will switch off and return the softener to its normal function.
It has been designed to fit under a single kitchen cupboard. All the unit requires is an inlet, outlet, drain, overflow and power supply.
Inlet (hard) connection height: 3/4” bsp male parallel
Outlet (soft) connection height: 3/4” bsp male parallel
Drain: 1” hose connector