Home of Ultra - Filo Bath Shower Mixer
The Filo is a pillar bath/shower mixer to replace your existing taps at the end of the bath, or for new installations.
The Filo has one ceramic disc central lever that is control the temperature and pressure, which make it easier to use and will offer trouble free maintenance over the years.
There is an automatic diverter to control the water from the bath filler to the showerhead, comes complete with a chrome plated shower hose, single mode handset and wall bracket.
The pressure of the water supply is entirely dependent upon the water supply so, if you have relatively low pressure, consider fitting a booster pump.
Changes in water pressure during operation of the shower will cause a change in the water temperature from the showerhead. If for example, somebody uses a tap on the basin, this will cause a drop in the water pressure to the shower. This can give an unwelcome surprise if it turns cold but can be more serious if the temperature increases. If others using the water whilst someone is showering is a problem then fitting a pressure equalising valve can help.
The tap centres are 180cm / 7 1/8”
Fully suitable for high-pressure installations.